Diary

…and it’s not the one I chose.

Having had the Road King Classic as my first choice, I was a little disappointed when we turned up at Woodstock Harley Davidson after an hour’s bus ride to collect the bikes to be told that as they were out of Road Kings I’d have to ride one of their fleet of Electra Glide Ultra Limited bikes instead.

Woodstock Harley Davidson, Illinois

I consoled myself by thinking about being able to hook up my iPod – bought specially for the trip – to its sound system but was horrified when I saw the colour: “root beer”, aka ‘horrendous metallic brown’.

Harley Davidson FLHTK Electra Glide Ultra Limited

A ride back into central Chicago with traffic jams on a hot day revealed that it started to pink when hot…

Arrived!

Well I’ve arrived here in Chicago at the start of Route 66. My fellow travellers will be gathering later today and the plan has changed slightly in view of the high temperatures around at the moment: we will be picking the bikes up on Sunday morning rather than Monday, so we can be on the road first thing Monday morning.

The flight was fine but it did take United Airlines 35 minutes to check my bag in which, coupled with the mile walk to the gate, meant I had no time to grab a coffee and breakfast at 6.00am. Grr!

US immigration was also sadly on a par with the UK Border Agency so more delay getting through there, exacerbated by an Air India flight which seemed to have mainly wheelchair-bound passengers…

Off to explore now, I think!

Today was Kawasaki Day at the Ace Cafe London. It was also the Virgin London Marathon and where I live the roads close at 8.00am. Despite GT taking part in the marathon – she managed a 4:00:44 finish time! – I headed off before the road closures to the Ace Cafe for Kawasaki Day, celebrating 40 years.

Of course, 11 and 23 mile markers en route were too good to pass unnoticed so I hoisted celebratory wheelies as I drove through!

Getting to the Ace at 8.00am I grabbed a cuppa and breakfast and then decided to have the ZRX dyno’d again now I’ve put some miles on it and the results were very impressive: 163.2bhp and 98ft/lb which even beat some poor bloke with a shiny ZZR1400 and Akra pipes!

Here are some photos too:

 

As something of a dry run for the US trip, three friends and I planned a week’s holiday to play in the Gorges de l’Ardèche in France. Sadly, Purge had to cancel a few weeks before the trip for family reasons so that just left Matt, Yox and me.

The trip started early – very early: 5.00am – on Saturday, 25th June with a quick dash to the Eurotunnel terminal off the M20. Cold and wet, so I put my Hein Gericke waterproof overjacket on, not bothering with the Belstaff waterproof overtrousers which had struggled to get over my Alpinestars SMX boots and the kneesliders on my leathers.

Soggy and chilly at Eurotunnel Terminal

Soggy and chilly at Eurotunnel Terminal

Matt and Yox

Matt and Yox

But we arrived and filled up with petrol before heading to find our train had been cancelled, setting us back half an hour before we’d even set off. The plan was to be in Joyeuse around 6.00pm if possible…

After the first few “splash and dash” stops to fill the bikes with petrol and us with coffee, it had warmed up and dried off so we could stash the waterproofs.

Sun Shining on the Righteous!

Sun Shining on the Righteous!

We soon arrived at the Hotel les Cèdres in Joyeuse despite being a little late – the hotel rang me to see if we were arriving soon when we were 150 miles away but that didn’t take us long… – and we checked in to a warm welcome and were told where the bikes could be parked safely. I’d stay there again.

Hotel les Cédres

Hotel les Cèdres

The most precarious toilet in the world?

The most precarious toilet in the world?

Sunday 26th and we went off to play in the Gorges de l’Ardèche: a great ride up and down the twisty roads of the Gorges de l’Ardèche – max 104mph – then three beers, a very large vodka before more beer. And Dinner… We’d also stopped earlier for a light snack lunch. Matt had managed to cut his arm overnight and Yox managed to get stung by a wasp en route.

Bikes at the Gorges de l'Ardèche

Bikes at the Gorges de l'Ardèche

Panorama: Gorges de l'Ardèche

Panorama: Gorges de l'Ardèche

Matt's Wound!

Matt's Wound!

Yox's Sting

Yox's Sting

Light Lunch...

Light Lunch...

Monday 27th and with temperatures still in the high 30s, we decided to do an even longer day: heading up to Le Puy, then Mende, then Villefort and back and all by the twistiest, most scenic routes we could find. And we weren’t disappointed. Neither were we disappointed by the ice creams at Rosiere when we got back.

Bikes in the sun

Bikes in the sun

Lozère

Lozere

Omnomnom!

Omnomnom!

Tuesday 28th and we decided to go for a few hundred miles again to see the Foster-designed Millau Bridge. Millau Bridge via Ales then Mende, Villefort and back. 39C+ Lots of twisties to enjoy. Cold beer and hot pizza to finish it off!

Yes it was as hot as it looks

Yes it was as hot as it looks

"How lost are we?"

"How lost are we?"

Heavy Engineering

Heavy Engineering

Millau Bridge

Millau Bridge

Panorama: Millau Bridge

Panorama: Millau Bridge

Matt had turned French...

Matt had turned French...

Wednesday 29th was our rest day. So we spent it whitewater canoeing for 24km down the Ardèche itself navigating a few sets of rapids along the way. Fortunately, we were taking our protective clothing seriously…

We took our protective headgear and eyewear very seriously...

We took our protective headgear and eyewear very seriously...

Matt had some issues with droopage

Matt had some issues with droopage

Compare and contrast

Compare and contrast

Yox pops his cork (note shorts torn to shreds when we capsized earlier)

Yox pops his cork (note shorts torn to shreds when we capsized earlier)

Alpha Bateau

Alpha Bateau

So yes, we did capsize in one set of rapids and I was hit by another canoe whilst scrabbling over the rocks (still underwater) to steady the canoe for Yox and me to get back in. Fortunately, the sun was out and despite the suntan lotion, my battered shins got sunburnt! Which meant I didn’t need to concentrate on the bruises and cuts or the aching arms :)

Thursday 30th and we went for a bimble about back in the Gorges de l’Ardèche again, stopping more frequently for photos this time. Still managed 80+ miles.

Once a Rexer, always a Rexer...

Once a Rexer, always a Rexer...

Yes, it was very hot

Yes, it was very hot

Ah, the usual!

Ah, the usual!

Journey's end for the whitewater canoe trips

Journey's end for the whitewater canoe trips

Friday 1st July and we realised we’d enjoyed the twisties in the Massif Central so much we should do them again and there were still a couple of routes we’d not tried before. So off we went for a 160 mile ride…

Bloody taggers!

Bloody taggers!

Saint-Julien-du-Tournel

Saint-Julien-du-Tournel

Yox's boot: proof of twistyness!

Yox's boot: proof of twistyness!

Saturday 2nd and back to the UK. Leaving a little after 8.15am, we made it back to the Eurotunnel with a couple of hours to spare, so we caught an earlier crossing. According to the TomTom SatNav unit, 688 miles on Saturday, average speed of 75mph, maximum speed of – cough – 122mph. That’s 2,111 miles that week, average speed of 59mph and a maximum declared speed of 135mph. “Declared” because the TomTom doesn’t display maximum speeds over that, so the 155mph and climbing I saw on one section of road – private, obviously, Officer! – didn’t register.

Well today I went to collect the ZRX from PDQ post-fettling. And yes, I think it looks great!

Larry mentioned that Nick had test-ridden it just to be on the safe side after they’d achieved their best-ever dyno results for a ZRX1200R on standard carbs/bores. I’d asked for a 44T rear sprocket as before and Larry suggested it would be sensible to go back to a 42T at some point as Nick had come back wide-eyed and declared it a tad berserk… We’ll see tomorrow!

PDQ Dyno Results

Well the results of the engine work and fettling at PDQ are in: up to 158bhp at the rear wheel! Well done to Larry and the team.

Dyno Chart

Dyno Chart

Also interesting is that that was up from 130bhp before their engine work and after I’d fitted a full Akrapovic system and rejetted it myself a while before.

And to put all that into context, it was dyno’d standard but with an Akrapovic end can in July 2005 and put out 114bhp (up from c. 108bhp as standard at the rear wheel).

A quick update on Blue Rex’s progress: it turns out that reprofiling my standard cams would have been experimental and Larry wasn’t prepared to experiment on a customer’s bike, so we agreed to buy a new set of ZZR1200 cams after all along with stronger valve springs.

As the clutch had been slipping on track for a while, I also asked Larry to upgrade the clutch plates and springs whilst it was apart.

In the intervening period, its MoT has expired so it’s been MoT’d and passed.

Worse was yet to come: PDQ have been awarded the sole concession for Dymag wheels worldwide and was offering an introductory deal … so a set of 7 spoke magnesium alloy wheels in satin black are going on with a new, slightly larger section Bridgestone BT016 tyre (which should be fine for our planned Ardeche Valley trip in June) rather than a full-on trackday tyre. Oh and as my secondhand Akrapovic full system would be looking out of place now, I’ve upgraded to a new hexagonal system with carbon fibre end can to set it all off – the removed parts will be for sale on the OC when I collect it. As that won’t be for a week or two, PDQ will run the engine in on the dyno and do a pre and post run-in dyno run for a reading as to what the engine is putting out.

Well after Robspeed Motorcycles at Grimsby serviced Blue Rex and left it misfiring within 3 miles of their workshops, I decided the time had come for Blue Rex to get some fettling and proper setting up.

I’d been keeping a set of cams I’d been sold a few years ago which I was told were ZZR1200 cams. So I rang Larry Webb at PDQ in Berkshire to ask him what he suggested. He recommended fitting those cams, gas-flowing the cylinder head, fitting high compression pistons (in the existing bore sizes) and then fettling it all together properly, so I dropped it off and have left them to it.

Bad news came recently: the cams I’d been sold were actually standard ZRX1200R cams so I now have the existing ones plus a set of new ones. Larry is going to send them to the States to get them re-profiled instead as that’s what they used to do back in the day. This will add a few hundred pounds more to the existing quote, but is cheaper than buying new ZZR1200 cams which are silly expensive.

We’ll see what results we get.

RBLR1000

I was signed up to do the RBLR1000 – 1,000 miles in 24 hours for charity with proceeds going to the Royal British Legion’s Poppy Appeal.

So I had the bike serviced at Robspeed: a full service with shim check, etc. and a new chain and front sprocket which left me with a little change from £500.

But on the way home it started spluttering a bit. I assumed that some fresh petrol would help, so I topped it up and then took it out for a shakedown run on Thursday. Fine wide full open but running rough as a dog’s bottom at low revs or tickover.

I daren’t use the bike for 1,000 miles in the Highlands, so I had to quickly fettle the Fireblade to have the satnav working and the like. And so I abandoned Blue Rex for the Blade for Scotland. Read on…

Alan, a friend from the ZRXOC – where his nickname is sifu2 – sent me a DVD with his footage from Kawasaki Day at the Ace Café which I’ve ripped and uploaded (with his permission, of course). It’s on YouTube but also here:

Click it to start and/or go large.